PRECISE CIRCULATING BATHS WITH CONTROLLABLE TEMPERATURES FROM AMBIENT +5°C TO 100 OR 200°C. CAPACITY FROM 20 TO 27 LITRES WITH  DIGITAL TEMPERATURE CONTROL AND DISPLAY.

DIGITERM 100: TEMP. RANGE AMB.+5°C TO 100°C. STABILITY ±0.05°C. SET ERROR ±1°C. RESOLUTION 0.1°C.

DIGITERM 200: TEMP. RANGE AMB.+5°C TO 200°C. STABILITY ±0.1°C. SET ERROR ±2°C. RESOLUTION 0.1°C.

SAFETY

CONFORMS TO THE DIN 12879.2 STANDARD. ADJUSTABLE OVER TEMPERATURE SAFETY CUT OFF WITH ADJUSTABLE MANUAL RESET. LOW LIQUID LEVEL CUT OFF. ELECTRICAL FAULT ALARM.

APPLICATIONS

Incubation processes.

Enzymatic reactions, Fermentation, laboratory cultures in general.

COMMON FEATURES

Double skinned baths with an AISI 310 stainless steel interior tank with an AISI 304 stainless steel exterior, for convenience, handles at the side and drain tap are provided as standard. A detachable immersion thermostat for controlling stirring and temperature is fitted. A cooling coil with the use of tap water or cooled re-circulator can be used to maintain ambient temperatures.

FEATURES

Microprocessor temperature control. The following parameters can be configured and shown on the LCD display.

• Maximum and minimum temperature limits.


• Select °C or °F.


• Display resolution 0.1 °C


• Over temperature set limits for alarm.


• Calibration.


• Low liquid level indicator.

Temperature sensor probe Pt 100.

Heating element made of stainless steel INCOLOY, resistant to high temperatures and corrosive environments.

Circulation pump with adjustable flow rate, suitable for external temperature control for: (Polarimeters, refractometers, viscometers, etc).

Cooling coil to maintain ambient temperatures, using tap water.

External temperature control connection using a Pt 100 probe

RS-232 interface for computer control or printing data.

External metal case with a corrosion resistant epoxy coating.

All parts in contact with liquid are made of AISI 304 stainless steel.

Handles at the side and drain tap.

CONTROL PANEL

Main power switch.

LCD Display showing working parameters.

Push button configuration selector.

Push button parameter selection.

Push button increase set value.

Push button decrease set value.

Push button Start/Stop.

ADITIONAL INFORMATION