Autoclave para conservas 75 L

Sterilisation autoclave Autester ST DRY PV II 80

Sterilisation autoclave with microprocesssor temperature and cycle control and pulsed vacuum and purge system

Features autoclave Autester ST DRY PV II 80

AISI 304 stainless steel exterior and top. AISI 316 stainless steel lid. Lid, six closure point system. Pulsed vacuum system and atmosphere purge. Incorporated steam generator, connected to the main chamber. Water reservoir for clean water for the steam generator boiler. External water connection if required. 6 function modes. Printer output. RS232 connection for download or to a printer. Connection for a second temperature sensor. Memory for 9 customer set programs.

Safety in autoclave Autester ST DRY PV II 80

Safety: The lid cannot be opened if the chamber is under pressure. Safety valve: Prevents over pressure over the maximum limit. Safety pressure switch: switches power off to the heater if over pressure. Safety Lid: insulated lid protection.

Control panel

1. LCD parameter indicator. 2. MONO single button control multifunction processor. 3. LED in operation. 4. Push button Start / Stop. 5. Printer (optional). 6. Open Lid.

Back view

1. Mains input. 2. External water supply. 3. Safety valve. 4. Vacuum vapour valve. 5. Air in filter valve. 6. Safety thermostat. 7. Safety thermostat. 8. Empty tank valve. 9. Drain tank valve. 10. RS232 Printer connection. 11. 2nd Temperature sensor connection.

Conformity

EN 61010-1 SAFETY FOR EQUIPMENT FOR LABORATORY USE EN 61010-2-041 SAFETY FOR STERILISER EQUIPMENT FOR LABORATORY USE EN 61326 ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT FOR LABORATORY USE

Adicional information